Bruce Jewell Business Studies Pdf Converter. 2000 Ford Windstar Wiring Diagram Manual Original. Click on thumbnail to zoom. This manual covers all 2000 Ford Windstar models including Cargo. View and Download FORD Windstar owner's manual. Do not place objects on top of the instrument panel as these objects may become. Box 2000 Oakville, Ontario.

• 2000 Windstar Workshop Manual Page 1 of 30 SECTION 501-16: Wipers and Washers 2000 Windstar Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: Wipers and Washers Refer to Wiring Diagrams Cell 81, Interval Wiper/Washer for schematic and connector information. Refer to Wiring Diagrams Cell 82, Liftgate Wiper/Washer for schematic and connector information. • 2000 Windstar Workshop Manual Page 2 of 30 B1309 Power Door Lock Circuit Short to Ground REFER to Section 501-14B.

B1319 Driver Door Ajar Circuit Failure REFER to Section 417-02. B1327 Passenger Door Ajar Circuit Failure REFER to Section 417-02. B1341 Power Door Unlock Circuit Short to Ground REFER to Section. • 2000 Windstar Workshop Manual Page 3 of 30 Description Expected Value ACCDLY Accessory Delay Relay Circuit Off---, Off--G, Off-B-, Off-BG, OffO--, OffO-G, OffOB-, OffOBG, On---, On--G, On-B-, On-BG, OnO--, OnO-G, OnOB-, OnOBG AL_EVT1 Last 8 Alarm Events DROPEN, HOODTR, IGNTAM, PANIC, T_AJAR, D_DOOR, RADIO, NOEVNT AL_EVT2 Last 8 Alarm Events DROPEN, HOODTR, IGNTAM, PANIC, T_AJAR, D_DOOR, RADIO, NOEVNT. • 2000 Windstar Workshop Manual Page 4 of 30 FRONT WINDSHIELD WIPER/WASHER WIPER RLY OFF, ON FUNCTION CONTROL 1 PWR RELAY OFF, ON HEAD/CORNERING LAMP CONTROL LEFT HIGH OFF, ON HEAD/CORNERING LAMP CONTROL LEFT LOW OFF, ON HEAD/CORNERING LAMP CONTROL LF CORNER OFF, ON HEAD/CORNERING LAMP CONTROL RF CORNER.

• 2000 Windstar Workshop Manual Page 5 of 30 Are the voltages greater than 10 volts? REINSTALL fuses, GO to REPAIR the BJB. REPEAT the FEM self-test, CLEAR the DTCs. A2 CHECK CIRCUIT 1452 (LB/RD) AND CIRCUIT 1119 (RD) FEM C346 FEM C190 FEM C192 Measure the voltage between FEM C346 Pin 1, Circuit 1452 (LB/RD), harness side and ground. • 2000 Windstar Workshop Manual Page 6 of 30 C1 (BK) C1 (BK) C1 (BK) Is the resistance less than 5 ohms? REFER to Section 418-00.

REPEAT the FEM self-test, CLEAR the DTCs. If still unable to communicate with the module, INSTALL a new FEM. • 2000 Windstar Workshop Manual Page 7 of 30 Measure the resistance between FEM C191 Pin 1, Circuit 1318 (DG/WH), harness side and windshield wiper ON/OFF relay Pin 2, Circuit 1318 (DG/WH), harness side. Is the resistance less than 5 ohms? INSTALL a new FEM. • 2000 Windstar Workshop Manual Page 8 of 30 Is DTC B1450 also present?

B7 CHECK THE MULTIFUNCTION SWITCH Multifunction Switch C263 Carry out the multifunction switch component test. Refer to Wiring Diagram Cell 149. Is the multifunction switch OK? • 2000 Windstar Workshop Manual Page 9 of 30 Is the resistance less than 5 ohms? REPAIR Circuit 1302 (WH/LG).

REPEAT the FEM self-test, CLEAR the DTCs. B11 CHECK CIRCUIT 1300 (PK) FOR OPEN Measure the resistance between the FEM C346 Pin 13, Circuit 1300 (PK), harness side and multifunction switch C263 Pin 4, Circuit 1300 (PK), harness side. • 2000 Windstar Workshop Manual Page 10 of 30 Are the resistances less than 5 ohms? REPAIR Circuit 1300 (PK), Circuit 1301 (YE), or 1302 (WH/LG) as necessary.